Magnetek Flex 12EX System Manual de usuario descargar pdf (Pagina 22)

Page 21

b. Non-Interlocked Functions

Contrary to interlocked settings, non-interlocked settings allow the two adjacent push buttons

be used simultaneously at the same time. Non-interlocked settings are usually applied to

crane’s auxiliary functions such as lights, horn, 3

speed, auxiliary stop and Pitch & Catch.

Each dip-switch on the decoder module corresponds to one (1) motion or two (2) adjacent

push buttons (left & right push buttons).

Function

Code

Dip

Position

Setting

Dip Position Setting

#2 ~ #4 (left button)

#5 ~ #7 (right button)

Function Description

A 1 000

Normal (momentary) contact.

B 1 001

Toggled (latching) contact.

C 1 010

Acceleration (3

speed).

D 1 011

Toggled (latching) contact affected by the

E-Stop command. When E-Stop command

is initiated, all toggled (latching) relays are

also deactivated.

E 1 101

Pitch & Catch Type-1. When Pitch (release)

function is initiated, receiver MAIN will

not be deactivated.

F 1 110

Pitch & Catch Type-2. When Pitch (release)

function is initiated, receiver MAIN will

be deactivated.

G 1 111

Auxiliary Stop.

Example #1: Left button (set to function code A) / right button (set to function code A) → 1 000 000

Example #2: Left button (set to function code B) / right button (set to function code B) → 1 001 001

Example #3: Left button (set to function code A) / right button (set to function code C) → 1 000 010

Example #4: Left button (set to function code F) / right button (set to function code A) → 1 110 000

! When set to Pitch & Catch function make sure the 2

transmitter is set to the next upper channel. For example, if the

system is preset at Ch.01 then the 2

transmitter should be set to Ch.02. Furthermore, you must also set the dip-switch

on the receiving module (position #7 & #8) to “01” position (2-channel scanning), please refer to page 19.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 36 37

Comentarios a estos manuales

Sin comentarios

Magnetek Flex 12EX System Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Magnetek Flex 12EX System