Magnetek Flex 12RS System Manual de instrucciones descargar pdf (Pagina 30)

Flex PRO / Flex M Pre-Engineered Radio Control System Instruction Manual

April 2012

Page 30 of 42

Figure 26: Typical Relay Wiring

9.4. FLEX M ANALOG I/O MODULE

Outputs: The four analog output signals are able to send voltage signals from 0 to +/-10VDC, at an 8bit

resolution. These outputs are for reference voltage only, so each one can only supply 20mA of current.

The outputs share a common ground reference, which is isolated from the Flex M system ground and any

additional I/O card output ground. These outputs can be preconfigured at the factory for different voltage

ranges (ex. 0-5VDC, or 3-6-9VDC).

Inputs: The four analog input signals are able to receive voltage signals from 0 to +10VDC, at an 8bit

resolution. The input impedance is 20K for these inputs. The inputs share a common ground reference,

which is shared with the Flex M system ground.

Relay 8

Relay 7

Relay 6

Relay 5

Relays 1-4

Relay Output 1

Input Power

Relay Output 2

Relay Output 3

Relay Output 4

Relay Output 5

Relay Output 6

Relay Output 7

Relay Output 8

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

Sin comentarios

Magnetek Flex 12RS System Manual de instrucciones Pagina 30