Magnetek Flex 12RS System Manual de instrucciones descargar pdf (Pagina 28)

Flex 4EX System Instruction Manual

December 2012

25 of 39

1 324 756 8

1234567812345678

RELAY FUNCTIONS

SYSTEM FUNCTIONS

TEST

JP7

JP6

JP5

JP4

JP3

JP2

JP1

I-CHIP PORT

PB1 & PB2 PB3 & PB4

PB5 & PB6

4.2.4 Dip-Switch Settings

4.2.4.1 Interlocked Functions

Interlocked means the two adjacent push buttons can not be activated simultaneously as

they will cancel each other out. Interlocked settings are usually applied to forward and

reverse motions. Each dip-switch on the decoder module corresponds to one (1) motion

or two (2) adjacent push buttons (refer to Fig. 14 & 15 below). Only the first seven (7)

dip-switch positions are used (counting from left to right); the 8

dip-switch position (far

right) is not used.

(Fig. 14)

(Fig. 15)

▇ Manufacture preset

Dip

Settings

Function Descriptions # of Relays Used

0000000 Normal (single speed only, F2 & R2 relays not used) 2

0000001 Closed/Closed Relay Action at 2

Speed (separate 2

speed relay) 4

0000010 Closed/Closed Relay Action at 2

Speed (shared 2

speed relay) 3

0000011 Opened/Closed Relay Action at 2

Speed (separate 2

speed relay) 4

0000110 On (right button) & Off (left button) 2

0001000

On & Off -- affected by the E-stop command. When E-stop command is

initiated, the Off relay is activated.

0001001

On + Start / Off + Start -- Prior to pressing the button you must first rotate

and hold the power key switch at START position to activate On or Off

relays.

0000111 Safety Magnet On & Off 2

0001010 FWD/REV toggled (latched). 2

0001011 FWD/REV toggled (latched) and affected by the E-stop command. 2

0100001 Closed/Closed + Brake 4

0100010 Closed/Closed Relay Action + Brake 3

0100011 Opened/Closed Relay Action + Brake 4

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 41 42

Comentarios a estos manuales

Sin comentarios

Magnetek Flex 12RS System Manual de instrucciones Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Magnetek Flex 12RS System