Magnetek Flex 12RS System Manual de instrucciones descargar pdf (Pagina 29)

Flex 4EX System Instruction Manual

December 2012

26 of 39

4.2.4.2 Non-Interlocked Functions

Contrary to interlocked settings, non-interlocked settings allow the two adjacent push

buttons be used simultaneously. Non-interlocked settings are usually applied to a crane’s

auxiliary functions, such as lights, a horn, 3

speed and auxiliary stop. Each dip-switch

on the decoder module corresponds to one (1) motion or two (2) adjacent push buttons

(left & right push buttons).

Function

Code

Dip

Position

Setting

Dip Position Setting

#2 - #4 (left button)

#5 - #7 (right button)

Function Description

A 1 000 Normal (momentary) contact.

B 1 001 Toggled (latching) contact.

C 1 010 Acceleration (3

speed).

D 1 011

Toggled (latching) contact affected by the

E-Stop command. When the E-Stop

command is initiated, all toggled (latching)

relays are also deactivated.

E 1 111 Auxiliary Stop.

F 1 100

Normal + Start function. For added safety,

you must first rotate and hold the power key

switch at “START” position and then press

the intended push button at the same

time to activate the output relay.

Example #1: Left button (set to function code A) / right button (set to function code A) → 1 000 000

Example #2: Left button (set to function code B) / right button (set to function code B) → 1 001 001

Example #3: Left button (set to function code A) / right button (set to function code C) → 1 000 010

Example #4: Left button (set to function code D) / right button (set to function code E) → 1 011 111

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

Sin comentarios

Magnetek Flex 12RS System Manual de instrucciones Pagina 29